BRIEF PRODUCT DESCRIPTION
The Insulation Tester has all the basic features needed to check and certify
an electrical installation. The buzzer feature is always ON.
The Batteries are tested at startup.
It complies to all good Standards.
The Test Button is utilized to switch the Instrument On as well as
to start or stop the test.
It is also utilized to accept a selection and to disable the EnerSave feature.
In order to use te PI and DAR function on this tester, the EnerSave need to
be disabled.
To disable EnerSave, the user need, while starting a test, to depress the
TEST key for more than 3 Seconds.
After 3 Seconds, a short beep will be heard, meaning that EnerSave has
been disabled.
Once EnerSave is disabled, the test duration can go for as long as 10
minutes.
At any time, the test can be stopped by depressing the Test key again.
The Ohm Key is a multi-purpose key, you press it to select the Continuity
Test, then you use it too to Auto-mull the test leads and fuse
There is an automatic Voltmeter which is accessed after start up.
The Voltmeter is the default mode of this instrument.
For Insulation Testing, the user can select the test voltage of 250V, 500V and
1000Vdc.
-4-
