Accessory list for the installation of aileron and flap.
3. Glue the horns to the aileron, Connect the horns to the
servo arms with the linkage and lock each side with
screws and nut. Make sure the aileron can at least 30mm
up and down movement.
1. Trim slots in appropriate position for wing servos right
and left, assemble the servo to the wing with screw, use a
steel wire to drag the servo arm to appropriate position
with the servo .
4. Secure the missile rail to the wing with screws, put the
wing carbon fiber bars to the wings .
2. Adjust the servo arm to the right position and fixing it to
the servo with screw, see picture .
5. Assemble the wing to the fuselage through the carbon
fiber bar, allow the servo lines go inside the fuselage,
secure the wing with the screws from the holes in bottom
of the fuselage.
第 4 页
