INSTALLATION AND ADJUSTMENT
14
§4 Operation
§4.1 Layout for the panel
1
Positive output:
The welder’s positive polarity output.
2
Negative output:
The welder’s negative polarity output.
3
Aero socket:
Is connected to torch switch control wire.
（
It has 14 leads and lead 8 - lead 9 are
connected to torch switch control wire
）
.
4
Shield gas connector:
Is connected to the gas input pipe of torch.
5
Power source switch:
Switch to “ON”, the welder is turned on, while switch to “OFF”, the welder
is turned off.
6
Power source input:
To connect power source.
7
water box connector:
To connect water box.
8
Shield gas input joint:
To connect one head of the gas hose while the other head of which is
connected to argon gas cylinder.
