6
INSTALL HORIZONTAL TAIL
Apply glue to inside edge of each
tailplane half as per photo and
mount to fuselage.
INSTALL VERTICAL TAIL FIN
Apply glue to base of the fin as
per photo and push into the slot
provided in the rear, removable
portion of the fuselage. Making
sure that it is absolutely vertical.
INSTALL STEERABLE FRONT
WHEEL
Push the servo wire through hole
in front of fuselage.
Install the servo horn onto to the
servo spline as far as it will go
and secure. Invert the servo and
mount with the horn and spline
end away from the fuselage.
Make the second hole in the horn
2mm diameter. With the
transmitter turned on and the
aircraft turned on set the trims
on the transmitter to centre and
ASSEMBLING THE AIRCRAFT
BAe Hawk Jet
ATTENTION
DO NOT CONNECT THE
POWER BEFORE
FINISHING ASSEMBLY!!!
TG Spitfire manual 4/2/07 11:09 Page 6
