c.
Function: Invert Display -‐ To invert the display, MIC button for 2 seconds.
9)
Reset Button
a.
In the times you may be experiencing trouble with your device, please restart device by shortly pressing the
reset button located next to the “Power button”.
Installation Instructions
1)
Shut vehicle engine off.
2)
With power off
, Insert the Micro SD card into the slot of the device.
a.
We suggest using class 6 or above micro SD card for the DVR Dash Camera and no less than 512 MB. The device
will support up to 32 GB SD card.
3)
Affix the DVR mounting frame on the front window.
a.
Please clean the window before placing mounting frame. Dirt and trace amounts of water will in less than
effective suction to window.
4)
Plug in charger into the car charger plug.
5)
Connect car charger to the DVR Dash Camera USB input
with charging/data cable.
6)
Place external camera at the back of the car, mind the direction of the view from the external Dash Camera. Cable can
be laid across the seats to the DVR Dash Camera in the front. Connect external Dash Camera using the AV cable and into
the Das Cameras AV-‐IN port.
7)
Adjust camera position to ensure the line of sight is perpendicular to the ground.
8)
Starting engine, check if DVR Dash Camera has been installed correctly.
a.
If DVR Dash Camera has been installed correctly, device will enter video recording mode automatically when
engine starts. Please check the screen display, if it is up side down, invert/non-‐invert the display with REC/MIC
button.
Operating Instructions
1)
Automatically Recording Function
a.
Video recording starts automatically when engine turns on, video recording indicator/audio recording indicator
starts flashing (2
nd
blue LED). After engine is shut down, video recording stops automatically after 12 seconds,
saving latest video and then powers off. Recorded videos have been saved in TF card.
b.
Video length can be set in “RT” menu, 1/2/5 minute video increments can be set, default setting is 1 minute.
c.
Video resolution can be set in menu, HD720P and VGA. Default setting is HD720P.
d.
DVR Dash Camera and External Dash Camera video store on SD card in either “DCIMA” or “DCIMB” folders.
2)
Manually Recording Function
a.
To start up DVR Dash Camera, press power button for 3 seconds. Video recording starts automatically.
Video/Audio recording indicator starts flashing. To shut down DVR Dash Camera, press power button for 3
seconds, last video will be saved automatically before powering off.
3)
Photographic Mode
a.
To enter photographic mode, shortly press “Camera” button. In the upper left corner of the display, notice that
the Movie Camera icon has changed into an icon of a Picture Camera. Shortly press “Camera” button to take a
photo. To switch back to video recording mode, press the “REC” button.
4)
Motion Detection
a.
To enter Motion Detection, press emergence button for 2 seconds. Under Motion Detection mode, DVR DASH
CAMERA records automatically when the camera senses movement. DVR DASH CAMERA enters into standby
mode when no moving objects are detected. To exit Motion Detection, press Emergence button for 2 seconds.
b.
Default setting of Movement Detection is off.
