4.3 Clean windshield first before you install mount on windshield.
4.4 Mount Dash camera to car wind shield with Dash camera bracket.
Insert car charger to cigarette light.
4.5 Connect car charger power cord to dash camera power sockets, either on mount
itself or on side of camera power socket. It is based on your preference.
Note: Cable can extend along the edge of the car windshield to hide.
4.6 Adjust lens position, make sure the lens has the same level as ground.
4.7 Start engine to power dash camera if CLA does not have constant power.
Dash Camera will automatically start.
Note: If the Dash camera is installed correctly, red dot indicator light will be flashing
on top left corner of dash camera screen.
4.Specification
Chip set
Novatek NT96655
Display
2.0 inch, 960x240
Video Resolution
2560x1440P 30fps /1920x1080P 30fps
Video format
MOV
Picture Resolution
12 million pixels CMOS
Picture format
JPG
Storage card type
SD card, includes 32GB microSD
Storage card capacity
Up to 256GB
USB Interface
USB2.0
Power code
USB2.0 DC5V 1A
Frequency
50HZ/60HZ
Battery
200mAh 3.7V polymer battery
Working Current
300mA
Mic/Speaker
Support
Languages
English / German / French / Spanish / Portuguese
/Simplified Chinese /Traditional Chinese / Japanese /
Russian
Note: The specification may different due to update software or other changes
Summary of Contents for TDEE1440CAM
Page 1: ...1440P Dash Camera Manual ...
