TARGET preset value is 100 , user can setting the pulse value by themselves, press the rotary button can setting TIME
value ( image 16), if do not need, press “START/ STOP “, it will start to work according the H.R.C function and show the
current pulse value .If not detect the pulse ,LED display as image 17.During the working time press “START” enter into
break mode, then press button “RESET” leave this mode.
Image 15 Image 16
Image 17
WATT FUNCTION
：
The preset watt value 120 ( image 18 ), by turning “+” or “-” button to setting the WATT value
( setting range : 10~350 ). Finished setting, press the rotary button to set TIME ( image 19), if no need setting the Time
value, press “ START/STOP”, resistance value will adjust automatic according to the set target WATT value.During the
working time press “START/STOP” enter into break mode, then press button “RESET” it will leave this mode.
Image 18 Image 19
RECOVERY FUNCTION
：
A.
If no pulse input, it’s invalid press “RECOVERY” button.
B.
If detected pulse input, press this button to “RECOVERY” function mode, time count down from 00:60
