8
2
HANDLE BAR ASSEMBLING
1. Place 2pcs Ø17_Wave Washer (124) into the center axle of Console Mast. Then place
Lower Handle Bar (L) (10) into left center axle of Console Mast, screw up with 5/16" ×
3/4"_Hex Head Bolt (76) and Ø8.5 × Ø26 × 2.0T_Flat Washer (104) by
12/14m/m_Wrench (118). Same way to screw up Lower Handle Bar (R) (11) into right
center axle of Console Mast.
2. Insert the shaft on left connecting arm (7) to the bushing on left pedal arm (5) and secure
with 5/16" × 15m/m Button Head Socket Bolt (77) together with Ø8.5 × 26 × 2.0T Flat
Washer (104) by using Combination M5 Allen Wrench & Phillips Head Screw Driver (121).
Do it the same way for right connecting arm (8) and right pedal arm (6).
3. Release Swing for Axle which are on left and right connecting arms (7.8). Connect the left
and right connecting arm (7.8) with left and right lower handle bar (10.11) and secure with
Swing for Axles and the screw by using 12/14m/m_Wrench (118).
