1. C o n n e c t t h e Console communication wire( 1 3 ) a n d Console connection
wire(18),connect the Handle pulse connection wire(16) and Console outset(17).
2. Attach the Console(11) to the Console fixed piece(10),tighten with Philips C.K.S. full
head screw(40).
3. Attach the Handlebar cover(L)( 27) and Handlebar cover(R)(28) through the
Handlebars(9) to the Upright post(4),tighten with Philips C.K.S. full head screw(39).
Tip: Make sure all screws are in the hexagonal hole before tighten all the bolts.
8
11
10
9
40
27
39
28
39
18
17
16
13
Workout tips:
1,User need to put the feet completely inside the pedal, and to adjust the resistance of
magnet control according to user.
2,Since the machine with double flywheels and it will have huge moment of inertia, when
the user stop before high speed, the user should minimize the resistance and lower the
speed, to avoid hurt the user’s leg by the moment of inertia of left and right pedal
3,The machine should be put on flat floor and have enough space for workout
Half-drawing for assembly
11
Summary of Contents for BRX95
Page 1: ...Ed 02 17 INSTRUCTION Rev 00 00 ...
Page 15: ...Drawig for assembly 15 ...
