1. Front and Rear Stabilizers Installation
Attach the Front Stabilizer (6)
and Rear Stablizer
（
4
）
onto the front curve of the Main
Frame (1) with four M10 x 57 Bolts (35), four Φ10 Arc Washers (36) and four M10 Cap
Nuts (34). Tighten cap nuts with the Multi Hex Tool provided.
2. Left and Right Foot Pedals Installation
The Cranks, Pedal Shafts, and Foot Pedals are marked “R” for Right and “L” for Left.
Insert pedal shaft of Left Foot Pedal (20) into threaded hole in the left crank. Turn the pedal
shaft by hand in
counter-clockwise
direction until snug.
Note:
DO NOT turn the pedal shaft in the clockwise direction, doing so will strip the threads.
Tighten the pedal shaft of Left Foot Pedal (20) with the Multi Hex Tool with Phillips
Screwdriver provided.
Insert pedal shaft of Right Foot Pedal (21) into threaded hole in right crank. Turn the pedal
shaft by hand in
clockwise
direction until snug. Tighten the pedal shaft of Right Foot Pedal
(21) with the Multi Hex Tool with Phillips Screwdriver provided.
3. Meter Post Installation
Remove four M8x15 Hexagon Bolts (24) and four Φ8 Curve Washers (37) from the tube of
Main Frame (1). Remove bolts with S6 Allen Wrench provided.
Insert the Meter Post(3) into the Cover for meter post(75)
6
Tool:
Multi Hex Tool with Phillips Screwdriver
Multi Hex Tool S19, S10, S13, S17
