The image of IDE hard disk configuration is
indicative only. The configuration of IDE hard
disk may vary according to different brands
or models. For more information, please read
the instructions of your hard disk.
2.1 IDE hard disk configuration
2.2 SATA hard disk configuration
In order to let the computer recognize the
external enclosure when there is an IDE
hard disk installed, the IDE hard disk should
be configured as MASTER mode. Please put
the jumper in a right position to configure the
IDE hard disk as MASTER mode.
It´s not necessary to configure the SATA hard
disk.
03
When an IDE hard disk is
connected, the external
enclosure ONLY works in
MASTER Mode
. Please set the
hard disk to
MASTER Mode
before installing it into the
enclosure. Read the hard disk
manual for more information.
Atención
