1
BASIC OPERATIONS
Power On
Short press the switch knob, the status LED will begin to flash blue. The
radio will connect to the network this can take up to 20 seconds, once
connected the radio will login, the status LED will begin to flash blue rapidly.
Power Off
Press and hold the switch knob to power off. The LED will illuminate red
and the LCD will display ‘
Power
Off’ during the shutting down process
. (This
can take up to 10 seconds)
Transmitting (TX.)
While pressing the PTT, the status LED will illuminate red indicating the
radio is in transmit mode. The second line on the LCD will indicate
Talking:
and the third line will indicate broadcasters ID.
Receiving (RX.)
When receiving a transmission, the status LED will illuminate blue. The
second line on the LCD will indicate
Listening:
and the third line will indicate
broadcasters ID.
Keypad Microphone
First PTT button for PTToC network Tx.
Second PTT button for analogue UHF Tx.
Press ≡ (menu) key to enter menu or confirm selection
Press
⯅
or
⯆
keys to select items
Press
⮌
(back) key to return to previous menu
Press P1 or the # key for mode Tx. select, when dual mode is active
In Analogue mode press and hold the * key to scan, scan group
ADVANCED OPERATIONS
Mode Selection
The radio has three different modes;
Dual Mode
Analogue Only
IP Only (PTToC Network)
To access mode selection;
1.
Press the ≡ (menu) key
2.
Short press
⯅
key twice and short press
≡
key to display
Advanced Settings
3.
Short press
⯅
or
⯆
keys to change between desired modes
4.
Press the
≡
key to save configuration
When in dual mode, press P1 or the # key for mode TX. selection. An arrow
will signify which TX. mode you are in.
Note. While in certain modes some settings may not be accessible.
Dual PTT
The keypad microphone has dual PTT buttons one for each mode. The first
PTT button is for the ToooAir Push-to-Talk over Cellular (PTToC) private
network and the second PTT button is for the Analogue UHF 80 CB. This
feature can be disabled.
1.
Press the ≡ (menu) key
2.
Short press
⯅
key twice and short press ≡ key to display
Advanced Settings
3.
Short press
⯅
key twice and short press ≡ key to display
PTT
Settings
4.
Short press
⯅
or
⯆
keys to change between desired PTT
settings
5.
Short press ≡ key to save configuration
Note. While in a single mode the second PTT button will become
inoperable.
RX. Priority
The radio can give priority to receiving a
broadcaster’s signal.
The priority
can be set to Network, Analogue, Dual or Sequential. In sequential mode
the radio will switch to the last received transmission.
1.
Press the ≡ (menu) key
2.
Short press
⯅
key
twice and short press ≡ key to display
Advanced Settings
3.
Press
⯆
three times and short press
≡
key to display RX.
Priority
4.
Short press
⯅
or
⯆
keys to change between desired RX.
Priorities
5.
Short press
≡
key to save selection
TX. Selection
The radio can automatically switch between modes based on last
received signal. The priority can be set to manual or auto, in auto the
radio will transmit on the last received transmission (Network or UHF).
1.
Press the ≡ (menu) key
2.
Short press
⯅
key twice and short press
≡ key to display
Advanced Settings
3.
Short press
⯆
twice and short press
≡
key to display TX.
Selection
4.
Short press
⯅
or
⯆
to choose desired TX. selection
5.
Short press
≡
key to save selection
Choose Group
The unit can change between groups to communicate with different groups
of users.
1.
Press the
≡ (menu)
key
2.
Short press
≡ key
to choose the Group List
3.
Short press
⯅
or
⯆
keys to choose desired group
4.
Short press ≡ key to enter the group
User
List
The unit can display all the users currently in the group and can use the user
list to create temporary individual or group calls.
1.
Press the ≡ (menu) key
2.
Short press
⯆
key twice and short press ≡ key to display
User List
3.
Short press
⯅
or
⯆
keys to change between desired users
4.
Short press ≡ key to select desired user
5.
Once all desired users are selected press PTT to begin temporary
call
Note. Only selecting one user will begin an individual temporary call with
the selected user.
Friends
List
The unit can access a friends list for quick communication to create
temporary individual or group calls. The friends list is like the User List
accept contains a select few users like a contacts menu.
1.
Press the ≡ (menu) key
2.
Short press
⯆
key and short
press ≡ key to display Friends list
3.
Short press
⯅
or
⯆
keys to change between desired users
4.
Short press ≡ key to select desired user
5.
Once all desired users are selected press PTT to begin temporary
Call
Note. Only selecting one user will begin an individual temporary call with
the selected user.