6.8. Enable/disable of the highest and lowest
temperature cursor
After the time setting is completed, press “ ” key to return.
Press “ MENU/ ” exit from the menu.
As shown in the figure, after selecting “ ” (cold hotspot), press the
“ ” button in the navigation key to enter the cold hotspot setting.
Press “ ” /“ ” key to select “enable” or “disable” the option.
Then press “ SELECT/ENTER ” key to determine selection.
After the setting is completed,press “ ” key to return. Press
“ MENU/ ” key to exit from the menu.
31
32
Spot
Off
On
Thermal Imaging Image Analysis Software
Operation Guide
1. Connect the product with a USB cable, and then connect to the
computer. Open the removable disk in the computer, find the
"INSTALLATION PACKAGE" folder and open it, and click to install
the software.
Software Installation And Operation
2. After installation, open Enter the picture analysis software
interface,click "Open File", and select the picture to be analyzed,as shown
in the figure:
24
h
L
M
