Customer Helpline
1300 889 028
15
Operating Instructions
8. PENDULUM ACTION CONTROL (SEE FIG I)
The pendulum action varies the forward cutting angle of the blade for increased cutting
efficiency. This can also be adjusted during no load running. Refer to the chart 1 for more
details. Do not use excessive blade force when cutting with the pendulum action. The blade
cuts on the upward stroke only.
Chart 1
0
Thin materials. Fine cuts. Tight curves.
I
Hard materials, (e.g. steel & chipboard)
II
Thick materials ( e.g. wood ) & plastic
III
Fast cuts (e.g. softwood). Cutting in the direction of the wood grain.
7
I
