Customer Helpline
1300 889 028
13
Operating Instructions
OPERATION
Intended Use
The power tool is intended for sawing and separating wooden materials, plastic, plaster,
non-ferrous metals and fasteners (e.g. nails and clamps) as well as for working on soft
wall tiles and for dry grinding of small surfaces. It is especially suitable for working close
to edges and for flush cutting.
WARNING: Do not touch the gear box after long working time, because it could
be hot.
1. MOUNTING ACCESSORIES (See Fig. C1-C3)
Caution:
For all work or when changing accessories, always wear protective gloves. Avoid
danger of injury from the sharp edges of the accessories. Accessories can become very
hot while working, presenting danger of burns! Make sure the tool is unplugged prior to
changing accessories.
WARNING:To reduce the risk of injury, do not let the sharp side of the accessory
face back toward the user’s hand.
The tool free system makes you change the accessories without using an Allen key.
1) Flip the tool-less accessory clamping lever forward to the open position.
2) Rotate the lever counterclockwise to loosen the flange.
3) Insert the accessory onto the Accessory Interface, then press down the flange with
finger to keep blade temporarily secure.
4) Rotate the lever clockwise until accessory is tightened securely.
5) Flip lever back down.
6) Return lever to seated position.
B1
B2
