Notice
Thank you very much for your purchase and support of our 3D printer. You may have purchased some of our other 3D products or have an
understanding of 3D printing technology. But we still hope that you can read the product guide carefully, and it contains a lot of important
information about the use of the product to give customers a better 3D experience. After reading and understanding the operation, you can start
your first print right away.
Before using this unit, be sure to read the following:
1. Safety Precautions Please use the consumables recommended by the original manufacturer for printer consumables. Do not use other
manufacturers' consumables at will, so as to avoid nozzle blockage. Do not attempt to use the unit in any way that is not described in the
instructions for use to avoid accidental personal injury and property damage.
2. This machine is suitable for being placed in a ventilated, dry and dust-free environment. Pay attention to the heat dissipation around the printer
when using it, and avoid placing it on a thick carpet or against a wall. Do not place the unit near flammable or explosive materials or high heat
sources. Do not place the unit in a location subject to excessive vibration or other instability. Do not stack heavy objects on the unit.
3. Use the power cord supplied with the unit in accordance with the specifications. Do not plug or unplug the power cord when your hands are
wet. Use a qualified three-hole socket with a ground wire. Do not deliberately pull or excessively twist the distribution line of the unit to prevent
open circuit or short circuit. Ensure grounding before running the printer to protect the printer from static electricity.
Summary of Contents for HCmaker20
