5. Leveling
1. Prepare → Align the hot bed and wait for the nozzle to return to the original position to move to the left
front of the platform.
2. Click Start and the nozzle will move to the four points above the platform.
3. Rotate the four platform screws under the platform to adjust the nozzle of the printing platform so
that the nozzle spacing from the platform is slightly larger than the thickness of one A4 paper, and the
spacing is about 0.2mm. We can use an A4 paper to assist in leveling so that the nozzle can easily pass
through an A4 sheet.
4. Complete the 4 points leveling in turn, the first leveling can be repeated once, and the leveling accuracy
will be better.
Summary of Contents for HCmaker20
