3
www.machineryhouse.com.au
www.machineryhouse.co.nz
Safety Specific For Punch & Flange Tool
Warning:
Some dust, fumes and gases created by power sanding, sawing, grinding,
drilling, welding and other construction activities contain chemicals that may cause cancer and birth
defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead based paint
• crystalline silica from bricks, cement and other masonry products
• arsenic and chromium from chemically treated timber
Your risk of exposure varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals, work in a well-ventilated area and work with approved safety
equipment, such as dust masks that are specifically designed to filter out microscopic particles
1. Do not try to punch or flange material thicker
than capacity specified in the specification
2. Appropriate footwear must be worn. Shoes
must be fully enclosed. No open-toed shoes.
3. Put on all required personal protective
equipment and proper eye protection must be
worn at all times by tool user and bystanders
4. Use this tool with both hands only. Using tools
with only one hand can result in loss of control
5. Always remove the tool from air supply and
activate trigger to bleed air-line before making
any adjustments, changing accessories, or
doing any maintenance or service on the tool
6. It must be understood by the operator that
common sense and caution are factors which
cannot be built into this product, but must be
supplied by the operator
Punching Capacity (Mild Steel)
1.2mm
Flange Capacity (Mild Steel)
14 Gauge
Punch Diameter
5mm
Air Requirements
4CFM (1131/min)
Maximum Air Pressure
90 PSI
Recommended Air Hose
10mm
Inlet
1/4” BSPT
Sound Pressure
85.5dBA
Length
250mm
Weight
1.9kg
Technical Specifications