Operating elements
1
2
2
3
4
5
6
7
8
9
10
2
11
1 Sliding cross bar
2 Alligator clamp
3 Soldering iron support
4 Dry cleaner
5 Cleaning sponge
6 Foot
7 Colophony
8 Mount for tin solder spindle
9 Tin solder spindle
10 Tin solder guide
11 Flexible gooseneck
Notes
• Place the product on a stable, horizontal surface. Protect precious furniture surfaces with a
suitable padding.
Make sure the product cannot tilt over or fall down.
• Loosen the screws from both mounts (8).
Turn one mount clockwise by 90° and the other mount anticlockwise by 90°.
Then tighten both screws.
You may then place the tin solder spindle (9) on the mounts.
• Immerse the cleaning sponge (5) into water and let it drain before placing it in the tray.
• Sensitive components could get damaged by the alligator clamps (2).
• Tighten all wing nuts with your hands only. Do not use any tools.
Cleaning and care
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions.
•
Clean the product with a dry, fibre-free cloth.
• Occasionally clean the sponge with clear, lukewarm water. Prior to that, remove any tin solder
residues from the sponge and dispose of them in an environmentally friendly manner.
Disposal
At the end of its service life, dispose of the product in accordance with applicable
regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the
environment.
Technical data
Operating/storage conditions ........
-6 to +46 °C, 20 - 80 % RH
Dimensions (W x H x D)
............... 190 x 350 x 172 mm
Weight .......................................... 900 g
Operating instructions
Third hand with tray stand
Item no. 1463094
Intended use
The product is intended for use as aid for soldering operations. The alligator clamps are
intended for securing components. On top of that, the product features a soldering iron support
and trays for storing the accessories included in the delivery scope.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
Read the instructions carefully and keep them. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Third hand with tray stand
• Cleaning sponge
• Dry cleaning agent with container
• Colophony
• Tin solder spindle
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions from our website www.conrad.com/downloads or
scan the printed QR code. Follow the instructions on the website.
Description of symbols
The symbol with an exclamation mark in a triangle indicates important instructions
contained in these operating instructions that must be followed.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
• Protect the product against extreme humidity and moisture (except: cleaning
sponge).
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
-
is visibly damaged,
-
is no longer working properly,
-
has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represents the technical status at the time of printing.
Copyright 2016 by Conrad Electronic SE.
*1463094_V1_1016_02_IPL_m_en