Assembly Instructions
Tripod for Work Lights
Item No. 2481638 (1x light)
Item No. 2481640 (2x lights)
Item No. 2481641 (3x lights)
1 Intended use
The product is a tripod for attaching work lights.
This product is compatible with the following work lights: Item No.: 2481637 and 2482471.
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in other hazards.
The product complies with the statutory national and European requirements. For safety and
approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
2 Delivery content
2481638
2481640
2481641
Tripod
1x mounting bar
1x mounting bar
1x bracket
2x brackets
3x brackets
1x screw
2x screws
3x screws
Assembly instructions
3 Latest product information
Download the latest operating instructions at
www.conrad.com/downloads
or scan the QR code
shown. Follow the instructions on the website.
4 Symbols in this document
The symbol warns of hazards that can lead to personal injury. Read the information
carefully.
5 Safety instructions
Read the assembly instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting per-
sonal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
5.1 General information
The device is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
If you have questions which remain unanswered by these operating instructions, contact
our technical support service or other technical personnel.
Maintenance, modifications and repairs must only be completed by a technician or an au-
thorised repair centre.
5.2 Handling
Please handle the product carefully. Jolts, impacts or a fall even from a low height can
damage the product.
5.3 Operating environment
Do not place the product under any mechanical stress.
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
Protect the product from high humidity and moisture.
Protect the product from direct sunlight.
5.4 Operation
Consult an expert when in doubt about the operation, safety or connection of the appliance.
If it is no longer possible to operate the product safely, take it out of operation and protect
it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation
can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.5 Connected devices
Also observe the safety and operating instructions of any other devices which are con-
nected to the product.
6 Assembly
Note:
Refer to the assembly image.
Images shown are for reference only, your product may differ slightly.
Make sure the installation surface is stable, level, and solid.
1. Loosen the screw, fully spread the base open, and then lock the screw to secure.
2. (If applicable) attach the mounting bar to the tripod using a screw as shown.
3. Attach the work light to the bracket using a screw as shown.
4. Extend the tripod by loosening and tightening the screws as shown.
7 Cleaning and care
Important:
Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
They damage the housing and can cause the product to malfunction.
Do not immerse the product in water.
Wipe the product with a dry, fibre-free cloth.
8 Technical data
Adjustable height ...................................... 0.7 - 1.6 m
Dimensions (L x W x H) (approx.)............. 150 x 120 x 1600 mm
Weight (approx.) ....................................... Item No. 2481638: 2.8 kg
Item No. 2481640: 3.5 kg
Item No. 2481641: 3.8 kg
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2022 by Conrad Electronic SE. *2481638_2481640_2481641_v1_0222_02_dh_mh_en
