39
9. Operation
Follow the information in the “Safety instructions”.
a) Switching on/off
Use the on/off switch (10) to switch the soldering station on (“I” position) or off (“O” position). After the soldering station
has been switched on, the display will switch on and show the welcome message for a few seconds. It will then show
the normal display.
b) Display elements
A Display bar for heating function 1 (more bars indicate a higher heat setting)
B Current temperature on channel 1
C Target temperature for channel 1 (the lock symbol indicates that the button lock is enabled)
D Model number for connected soldering iron or soldering tweezers on channel 1
E Preset temperature for speed dial button “1”
F Preset temperature for speed dial button “2”
G Temperature unit (°C or °F)
H Preset temperature for speed dial button “3”
I Model number for connected soldering iron or soldering tweezers on channel 2
J Target temperature for channel 2 (the lock symbol indicates that the button lock is enabled)
K Current temperature on channel 2
L Display bar for heating function 2 (more bars indicate a higher heat setting)
Summary of Contents for 2108748
Page 26: ...26 ...
