13
1. Introduction
Dear customer,
Thank you for purchasing this product.
This product complies with statutory national and European regulations.
In order to ensure continued fulfilment of legal requirements and to guarantee safe operation, always follow the
instructions in this manual.
These operating instructions are part of this product. They contain important information on setting up and
using the product. Do not give this product to a third party without the operating instructions. Therefore,
retain these operating instructions for reference!
If there are any technical questions, please contact:
International:
www.conrad.com/contact
United Kingdom: www.conrad-electronic.co.uk/contact
2. Explanation of symbols
The symbol with an exclamation mark in a triangle is used to highlight important information in these
operating instructions. Always read this information carefully.
The arrow symbol alerts the user to the presence of important tips and notes on using the device.
3. Intended Use
This product is used for the flexible suspension of lightweight electric cable hoists. The maximum permissible load
on the load point varies depending on the distance from the vertical pipe support (boom arm length). For a boom arm
length of 750 mm, the weight lifted by the cable hoist must not exceed 600 kg. For a boom arm length of 1100 mm,
the weight lifted by the cable hoist must not exceed 300 kg. The horizontal swivel angle of the boom arm is between
-90° and + 90°.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the product for purposes
other than those described above may damage the components. In addition, improper use may pose hazards such
as tearing off, etc. Read the instructions carefully and store them in a safe place. Only make this product available to
third parties together with its operating instructions.
All company and product names are trademarks of their respective owners. All rights reserved.