By default, the measured value is measured from
the back of the device.
c) Unit
Briefly press the Unit button to change the unit. The following
units are available:
• m = meters
• ft = foot
• in = inch
• ---’--” = feet/inches
13. Making measurements
Measurements can only be performed when the
laser is turned on.
• Press the MEAS button to activate the laser.
• If the target laser is enabled, press the MEAS button to
make a measurement.
• Press the C button to delete a value during the
measurement process.
14. Distance measurement
• Point the laser point at the target at a right angle and try to
hold the device as calm as possible.
• Press the MEAS button. After a short time, a beep signal
sounds and the measured value is displayed on the
display.
36
