TOOL WAREHOUSE WT03056, Original Instructions Manual

Page: 9 / 15

LED worklight
The impact wrench is equipped with an LED worklight(7).
The LED worklight
illuminates immediately after
pulling
the trigger and turns off once you
release the trigger.
5.
MAINTENANCE AND CLEANING
The driver is maintenance – free but must be kept clean. All replacement
parts must be replaced by a trained electrician or an authorized service centre
unless stated otherwise in this manual.
Lubrication
The machine does not require additional lubrication
Cleaning
Clean the battery charger housing using a soft, dry cloth. Disconnect the
charger from the mains before cleaning.
Remove the battery before cleaning the tool.
Ensure that the ventilation slots are not blocked and clean the machine’s
housing regularly with a soft cloth.
6.
BATTERY PACK AND BATTERY CHARGER
Safety
Correct handing of battery pack and battery chargers

Ensure that the power tool is switched OFF before you insert the battery
pack. Inserting a battery pack into a power tool that is the switch can be
locked in on position can cause accidents.