Figure 6
ITEM
(1)
Interference Blanker
(2)
Motor Kit
(3)
Gear Assembly Kit
(4)
Yoke Block
(5)
Plunger
(6)
Grease Release Valve
(7)
Filler Nipple
(8)
Vent Valve
(9)
Circuit Breaker
(10) Jiggle Switch
(11) Button
(12) Check Valve Kit
(13) Battery Capacity Display
TROUBLESHOOTING
CONDITION
POSSIBLE CAUSE
CORRECTIVE ACTION
Motor fails to run
•
Battery needs recharging
•
Faulty wiring to motor
•
Recharge battery
•
Remove battery, disassemble
handle and check wiring for
loose connections
Pressure relief valve opens to
discharge grease
•
Blocked line
•
Blocked bearing
•
Blocked grease fitting
•
Check lines, brazing and
grease fitting to remove or
clean obstructions
Grease Gun fails to dispense
grease
•
Grease tube assembly is out of
grease
•
Loss of prime
•
Ball check (item # 12) is not
functioning. (See Figure 6)
•
Check that the container has
grease
•
Repeat priming operation.
•
Remove item #12, clean and
inspect ball seat area
Grease Gun continues to lose
prime
•
Air may be trapped in several
locations in container after bulk
filling
•
Follower may be binding in
grease tube assembly
•
Empty grease tube assembly,
refill and repeat priming
operation
•
Replace container (item # 10)
(See Figure 5)
Battery fails to take a charge
•
Charger may not have power
•
Battery may be bad
•
Check that the AC outlet or the
DC car socket has power.
•
Replace battery
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories
and packaging should be sorted, taken to a recycling centre and disposed of in a manner
which is compatible with the environment.
DISPOSAL
Do not dispose battery in household waste.
Batteries should be disposed of in a responsible manner, they must be disposed at
appropriate collection point.
6
