Tool-Temp TT-188, Manual Of Instruction

Page: 5 / 45

Manual of instructions TT-188 5/37
Use as intended also entails compliance with the operating, servicing and maintenance conditions
stipulated by the manufacturer. The temperature control unit may only be operated, serviced and
maintained by personnel who are familiar with these tasks and have been instructed as to the risks.
1.4. Safety Information
1.4.1. General Information
The TOOL-TEMP temperature control unit is safe to operate, but this device can pose danger to
life and limb if it is used incorrectly or for a purpose other than that intended. It should be noted
that this poses risks to the life and limb of the user or third parties, adverse effects on the
equipment and other material assets belonging to the user, and risks to the efficient operation of
the equipment.
Start-up (i.e., commencement of intended use) is prohibited until it has been determined that the
temperature control unit has been set up and wired in accordance with the Machinery Directive
(2006/42/EC). EN 60204-1 (Safety of Machinery) must also be observed.
These operating instructions must be read carefully before turning on and operating the
temperature control unit. The information regarding the intended use and foreseeable misuse
must be observed. Local safety regulations must also be obeyed.
If the temperature control unit is used in combination with products by other manufacturers, their
notices and safety regulations must also be obeyed.
1.4.2. Process Monitoring
In plants in which a temperature control system malfunction leads to endangerment of the
operating personnel or destruction of the plant, an independent process monitor that shuts down
the plant reliably must be used.
1.4.3. Information for Operators and Personnel
The operator and all persons who are tasked with working on the temperature control unit must
obey the fundamental regulations regarding work safety and accident prevention. The operator
must ensure that only persons who have read and understood these operating instructions,
particularly the chapter on safety, work on the temperature control unit.
WARNING
People with pacemaker should not be allowed to demount or maintain the
magnetically coupled pump!
Any working methods that have a negative effect on the technical safety of the temperature
control unit must not be used. The operator must ensure that the temperature control unit is
operated only in flawless condition. If necessary, the company using the equipment must obligate
the operating personnel to wear protective clothing.
For all tasks having to do with set-up, start-up, operating, modification of operating conditions and
operational modes, maintenance, inspection and repair, any shut-down procedures stated to be
necessary in the operating instructions must be followed.