26
9) TX (Infrared transmitter)
Use the ENTER/REC button to turn the infrared
transmitter on/off.
On,
Off
Infrared transmitter icon
The infrared transmitter setting is common to all
programs, and is remembered even when the
power is turned off.
Use the infrared transmitter within a visually un-
obstructed range of 4 meters or less.
If the infrared transmitter is left on, the battery
life will be shorter. If you are not using the infra-
red transmitter, you should turn it off.
10) WRITE
Here you can write (store) a program that you
created.
Use the Value dial to select the writing destina-
tion (User programs only). When you do so, the
name of the program that currently occupies the
writing destination will be displayed briefly.
If you decide not to write, press the
√
(or
®
)
button to select a different screen.
When you press the ENTER/REC button, the
edited program will be written into memory.
When the program has been written, the LCD
will indicate “COMPLT” for approximately one sec-
ond.
Program number that currently
occupies the writing destination
Write
Select a user program
number as the writing
destination
Before writing an edited program into a differ-
ent program number, be sure that you do not
mind overwriting the data that is currently in that
program number. The program data that is over-
written will be lost.
It is not possible to write to a preset program.
Summary of Contents for Toneworks Pandora PX4
Page 1: ......
