TonerRefillKits.com
RechargX™ RX201A v1
Mon - Fri 8am - 5pm ET
© 1995-2011 ReChargX™, EmptyX, TonerRefillKits and TonerRefillKits.com, the TonerRefillKits logo, the
2011.12.21
800.527.3712 or 352.343.7533 ReChargX™ and EmptyX logos are trademarks owned by TonerRefillkits, LLC. All rights reserved.
Page 9 of 10
Step 16: Reinstall the Cartridge End-cap
Place the end-cap back onto the cartridge in the
same orientation as it had been prior to being
removed, then use a philips-head screwdriver
to replace each of the screws back into the end
cap (figures 17a and 17b).
Step 17: Removing the Piece of Paper
With the cartridge refilled and the flag gear
reset, remove the paper from both sides of the
developer roller, as shown in figure 18.
This piece of paper can now be discarded.
Figure 17a:
Replace the cartridge end-cap
Figure 17b:
Reinstall the screws that held the end-cap
in place
Figure 18:
Remove the piece of paper from the toner
cartridge
