TonerRefillKits ReChargX RX201A Instructions Manual Download Page 7

TonerRefillKits.com

  

RechargX™ RX201A v1

Mon - Fri  8am - 5pm ET                     

© 1995-2011 ReChargX™, EmptyX, TonerRefillKits and TonerRefillKits.com, the TonerRefillKits logo, the  

2011.12.21

800.527.3712 or 352.343.7533                 ReChargX™ and EmptyX logos are trademarks owned by TonerRefillkits, LLC. All rights reserved. 

Page 7 of 10

Step 14: Locate Both Tabs on the    

Flag gear

To reset the flag gear you must first locate 

two tabs on the flag gear itself. The first tab 

is located on the top of the flag gear near the 

center post, as shown by the black circle in 

figure 14a. This first tab is the one you will 

be using to rotate the flag gear.

The second tab will be found in the lower left 

section of the flag gear, shown by the black circle 

in figure 14b.

Step 15: Resetting the Flag gear

Rotate the flag gear counter clockwise just far 

enough so the tab in the seven o’clock position 

is now in the five o’clock position. The path from 

the seven o’clock to the five o’clock is shown by 

the red arrow in figure 15.

NOTE:

 This step is continued in more detail on 

the following page.

Figure 14a:

 Locate the first tab on the flag gear.

Figure 14b:

 Locate the second tab on the flag gear

Figure 15: 

The path of the tab on the lower left of the gear

Summary of Contents for ReChargX RX201A











Reviews: