7
Similarly, user can cancel the multiplexed programs from the right box.
To select all the input programs
To select all the output programs
To parse programs
time limitation of parsing input programs
3.2.3 Settings Output: Modulator:
Select “Modulator”, to set up the analog output channels (Figure-4) NOTE all your channels
must be within a 400 MHz wide bandwidth window. The DIP3200A will not allow you to
select a channel beyond the window so make sure your first channel and last channel are
no more than 394 MHz apart.
Figure-4
Remember to save changes, refer to 3.3.3
The analog output channels are selected based on the picture carrier frequency. Use the
Frequency List (Figure 5) to choose the correct frequency for the channel you want.
Channel 1 will be the first program you selected on the IP Input and Channel 2 will be the
second channel selected and so on.