2.Installation
IR Remote Sensor Connection to TV
IR Remote Sensor
Connect the I/R remote sensor when the DCM4-700V set top is placed out of view (such as
behind your TV) so the remote will continue to operate.
Plug the I/R remote into the side of the DCM4-700V set top. Place the DCM4-700V set top
in the desired out of the way location. Fix the round end of the I/R remote in a location
where it can receive the signal from the remote control such as on the front edge of your TV.
(put on TV frame not the screen). Use the supplied hook and loop tape to mount the
sensor.
NOTE: The signal from the remote to the I/R sensor is an Infrared Light so they must be in line
of sight. Distance between the remote and I/R sensor should be between 2’ and 10’ for proper
operation.