Tone STC50AE, Instruction Manual

Page: 15 / 36

- 14 -
CAUTION
CAUTION CAUTION
CAUTION
● Follow the instructions below when using generators. Follow the instructions below when using generators. Follow the instructions below when using generators. Follow the instructions below when using generators.
○ Use 50-60Hz sinusoidal power supply without high harmonic wave.
Power supply including high harmonic wave may cause malfunction or
breakage of the wrench.
○ Use high capacity generators.
Almost 2kW (2kVA) is required per one wrench.
○ The operating voltage must remain /-10% of the rated voltage at
all times.
○ Do not use inverter generators.
Inverter generators may cause malfunction or breakage of the wrench.
(Inverter Generator: The engine rpm will speed up and slow down
automatically due to the wattage being pulled from the generator.)
○ Do not use welder generators.
○ Welder generators may cause malfunction or breakage of the control
base installed in Simple Torqon. Some welder generators produce
electrical noise which may make Simple Torqon out of control.
○ Do not use welders along with Simple Torqon.
Simple Torqon may be out of control due to extraordinary electrical
noise even if welders are connected to other generators that Simple
Torqon is not connected to.