tone weal
tone weal
www.toneweal.com
5
INPUT
This input jack receives output from electric guitar and other electronic instruments
OUTPUT
This jack feeds signal to amplifier.
AC ADAPTOR JACK
AT2-DISTORTION operates both from self-contained battery (9V) and from AC line. Connect a AC Adaptor (DC9V)
to this jack, and the battery is disconnected from the circuit, guaranteeing stable longtime performance.
PEDAL SWITCH
This is a changeover switch for Normal or Effect. By use of True Bypass SWITCH, first in these kinds of small size
effect units, pop noise is perfectly eliminated and AT2-DISTORTION can be satisfactorily employed even in studio
recording.
CHECK LAMP
While pedal is trod down, this lamp lights if battery is normal. Thus this lamp lets you confirm the changeover
between Effect and Normal modes, and also battery state. If the indicator fails to light, replace the battery with a
new one.
SCREW
When replacing battery, loosen this screw to open the caw. Do no remove off the screw from the pedal. If you do,
be careful not to lose it.
Summary of Contents for AT-Series
Page 1: ...1 ...
