Tone Commander 40d120, Installation Instructions Manual

Page: 55 / 142

Editing Incoming Call Identifier Queue Assignments
·
Select QUEUE from the Setup menu.
The Queue menu will be displayed.
·
Select ICI from the Queue menu.
The ICI menu will be displayed.
·
Use NEXT or LAST to scroll through the Incoming Call Identifiers.
·
Select EDIT to change the display translations, queue assignments, or timeout for the displayed call
identifier.
·
NEXT moves between the IDENTIFIER, QUEUE, TIMEOUT, and TIMEOUT QUEUE fields.
·
Enter a text string (Display Translation) that will be displayed on the console to identify the call type.
Characters are entered with the dial pad – refer to page 64. If this field is blank, the three character
identifier will be displayed.
In the example above, External is displayed for an InX call type.
Predefined identifiers cannot be edited – only the Display Translation string can be changed.
·
Enter the queue number, timeout value (seconds), and timeout queue number with the dial pad.
Queues with a lower number have a higher priority (will be answered first).
Calls in queues 0-3 will be displayed immediately and displace the currently ringing call. Use
these queues only for emergency call types.
Calls in queues 4-8 remain in queue until the currently displayed call is answered.
If this call identifier is to remain in the same queue after the timeout period, set QUEUE and
TIMEOUT QUEUE to the same value.
·
The arrow keys move the cursor position.
DELETE allows you to delete individual characters or an entire field. A delete operation may be
canceled by selecting ABORT.
·
Select EXIT to store changes for this call type.
or
Select ABORT to cancel any changes.
·
You will be returned to the queue selection screen. Select another incoming call identifier.
or
Select EXIT to return to the Queues menu.
13-102633 Rev. H Page 55
Tone Commander 40d120 Installation Instructions
QUEUE MENU [QUEUE]
ICI CA EXIT
IDENTIFIER: InX External [ICI]
QUEUE: 01
TIMEOUT: 060
TIMEOUT QUEUE: 01
NEXT LAST
EDIT
ADD EXIT