EN
• Never immerse the device in water.
• Wipe your device occasionally using a damp cloth and
then rub dry. Always keep the electrical charge contacts
clean.
• Clean the blades with the brush provided after every use
(see Fig.
6
5
7
8
3
2
1
4
10
9
11
12
15
16
13
14
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
).
• Oil the clipper blades at least once a day at the exact points
described in Fig.
6
5
7
8
3
2
1
4
10
9
11
12
15
16
13
14
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
. Just 1 drop per lubricating point. After
lubrication, briefly switch on the device to spread the oil.
Never use any other products for maintenance: This oil has
been specially developed for hair clippers and designed to
not vapourise or slow down the blades.
If the cutting performance deteriorates after a certain
period of use despite regular care, it is time to replace the
clipper blades (see Fig.
6
5
7
8
3
2
1
4
10
9
11
12
15
16
13
14
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
). These are obtainable from
your stockist.
Detach the cutting head for thorough cleaning
• Remove the cutting plates as shown in figures
6
5
7
8
3
2
1
4
10
9
11
12
15
16
13
14
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
.
• Remove the hair cut thoroughly with a brush.
• Attach the cutting head again as shown in
6
5
7
8
3
2
1
4
10
9
11
12
15
16
13
14
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
.
Caution!
Do not use force. The cutter edge must clearly lock
into place.
Battery disposal
As consumer you are required by law to dis-
pose of used batteries and charger as hazardous waste.
Information on how to remove the battery when the device
reaches the end of its service life can be found in figures
6
5
7
8
3
2
1
4
10
9
11
12
15
16
13
14
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
to
6
5
7
8
3
2
1
4
10
9
11
12
15
16
13
14
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
. The device must be disposed of and NOT used again
after removing the battery.
Caution! Risk of injury from defective, leaking battery!
The applied battery contains substances that can result in
injuries when getting in contact with skin or when inhaled.
Should your device have a drained battery, you must use
rubber gloves to remove it from the device and properly dis-
pose of it in a closed container. According to the European
Directive 2013/56/EU, faulty batteries must be collected
separately and reused or recycled in an environmentally
friendly manner.
Disposal possibilities are as follows:
– by dealer
– at a GRS recycling centre
– in special waste containers provided by the communities
Obtain additional disposal information from your community
or city.
Waste from electrical device at the end of their service life
Do not dispose of electrical devices with domestic waste! In ac-
cordance with European Directive 2012/19 / EU on old electrical
and electronic devices and its implementation in the national
law, electrical tools that are no longer suitable for use must be
separately collected and sent for recycling in an environmentally
sound manner. Recycling alternative for the return request:
Alternatively, the owner of an electric or electronic device is obli-
gated to cooperate in proper recycling in the event of a property
task instead of returning. Old equipment can also be 0ed in the
national recycling and waste management laws.
This does not apply to the accessories and aids included in old
equipment, which do not contain electrical components.
Warranty period
TONDEO grants the legal warranty to all electrical device
components not liable to wear and tear in all EU Member
States for all its electrical devices. In non-EU states, please
ask your specialist dealer. Not included in the warranty are
damages that can be attributed to regular wear and tear cut-
ting blades and batteries) as well as damages attributable to
improper use of the device.
This device conforms to European Directives
2006/42/EG 2014/30/EU, 2014/35/EU, 2011/65/EC,
2009/125/ EC, and Regulation (EC) No. 1275/2008.
Included items
1 clipper
5 attachment combs (4 mm, 8 mm, 12 mm, 16 mm,
20 mm)
1 maintenance set for cutting blades (oil bottle, cleaning
brush)
1 operating guide
The operating instructions can also be downloaded from the
TONDEO homepage using the following link: https://www.
tondeo.com/detail/index/sArticle/1445/.
Technical data
Model:
ECO XP Lithium
Item no.:
32502
Battery:
Li-Ion, 3.6 V, 3200 mAh
Charging time:
2.0 - 2.5 h
Period of use
without charging:
4.5 - 5.0 h
Charger Input:
100-240 V // 50/60 Hz // 0.5 A
Charger Output:
9 V // 2.0 A
Output:
10 W
Power cord:
3.0 m
Weight:
280 g
Protection class II:
In case of commercial use: The A-weighted emission sound
pressure level (LpA) is < 70.0 dB(A). The A-evaluated noise
output level (LwA), is < 78.0 dB(A). The vibration emission
reference is 4.0m/s
2
.
During the course of product improvements, we reserve the
right to make technical and optical modifications to the item.
These instructions can be obtained from the manufacturer.
You can find the address on the back of these instructions or
on the warranty card.
ES
FI
Summary of Contents for 32502
