Tomura 16-CH User Manual Download Page 15

Page: 15 / 121

- 15 -

3. Installations

The installations described below should be made by qualified service personnel or
system installers.

3.1 Basic Connections

Please refer to the following diagram for the connections.

Please make sure to set the NTSC/PAL Selector Switch on the back panel

according to the local TV system for the digital video/audio recorder to work
correctly.



Cameras

Connect the camera video input connectors to the video outputs from system
cameras or other composite video sources via coaxial cables.



Main monitor

Connect the main monitor output connector (BNC/S-video/VGA or optional
HDMI) to a surveillance TV/VGA monitor. The TV/VGA monitor displays
selected live or recorded cameras in any available split window format.



Hard disk drive(s)

Make sure to install at least one SATA hard disk drive inside the hard disk tray.

Note 1: Whether the upper HDD or the lower one is set as HDD#1 is fine for the

system. But it‟s always a good habit to connect the upper one to
HDD#1 cable.

Note 2:

Each of the HDDs must be formatted before it can be used to record

Summary of Contents for 16-CH


























































































































Search results

Summary of Contents for 16-CH

Reviews:

Related manuals for 16-CH

Brands by name

Popular brands

Tomura 16-CH, User Manual

Search results

Summary of Contents for 16-CH

Reviews:

Related manuals for 16-CH

Brands by name

Popular brands