TomTom Navigator SDK and Installation And Use Manual Download Page 28

Page: 28 / 59

5.2.22. Sub DeleteClosestPoi( aFilename As String, aLongitude As

Long, aLatitude As Long)

Command Parameters:

•

aFilename As String:

name of the POI category.

•

aLongitude As Long:

longitude specified in WGS84 format (in millionths of degree).

•

aLatitude As Long:

latitude specified in WGS84 format (in millionths of degree).

Supported Since:

TTN 1.51

Delete a point of interest from the .OV2 file specified by the POI category argument. The point of

interest to be deleted is the closest one to the given co−ordinates among the points of interest that are
within a distance of 100 meters from there.

See Also:

AddPoi, DeleteAllPoi, MakeUserPoiVisible, MoveClosestPoi

5.2.23. Sub DeleteAllPoi( aFilename As String)

Command Parameters:

•

aFilename As String:

name of the POI category.

Supported Since:

TTN 1.51

Delete all points of interest from the .OV2 file specified by the POI category argument. The POI

category itself is also removed after that.

See Also:

AddPoi, DeleteClosestPoi, MakeUserPoiVisible, MoveClosestPoi

5.2.24. Sub MakeUserPoiVisible( aFilename As String, aVisibility As

Boolean)

Command Parameters:

•

aFilename As String:

name of the POI category.

•

aVisibility As Boolean:

whether to show or hide this POI type on the map.

Supported Since:

TTN 2.0

Enable or disable displaying a specific user−created POI type.

See Also:

AddPoi, DeleteClosestPoi, DeleteAllPoi, MoveClosestPoi

5.2.25. Sub MoveClosestPoi( aFilename As String, aLongitude As

Long, aLatitude As Long, aNewLongitude As Long, aNewLatitude As
Long)

Command Parameters:

•

aFilename As String:

name of the POI category.

•

aLongitude As Long:

old longitude specified in WGS84 format (in millionths of degree).

•

aLatitude As Long:

old latitude specified in WGS84 format (in millionths of degree).

•

aNewLongitude As Long:

new longitude specified in WGS84 format (in millionths of degree).

•

aNewLatitude As Long:

new latitude specified in WGS84 format (in millionths of degree).

Supported Since:

TTN 1.51

Move a point of interest from the .OV2 file specified by the POI category argument to a new position.

The point of interest to be moved is the closest one to the given old co−ordinates among the points of
interest that are within a distance of 100 meters from there.

See Also:

AddPoi, DeleteClosestPoi, DeleteAllPoi, MakeUserPoiVisible

5. Communicating with TomTom Navigator from Visual Basic

Summary of Contents for Navigator SDK and



























































Search results

Summary of Contents for Navigator SDK and

Reviews:

Related manuals for Navigator SDK and

Brands by name

Popular brands

TomTom Navigator SDK and, Installation And Use Manual

Search results

Summary of Contents for Navigator SDK and

Reviews:

Related manuals for Navigator SDK and

Brands by name

Popular brands