37
Reporting incorrect camera alerts
You may receive an alert for a camera that is no longer there. To report an incorrect camera
alert, do the following:
1. While you are at the location of the missing camera, tap
Report
in the Driving View.
2. Tap
Remove
.
Changing the way you are warned
Note:
You can only report an incorrect camera alert while you are at the location.
Note:
This must be done within 20 seconds of receiving the camera alert.
Note:
It's possible to report or confirm the location of danger zones, but it's not possible to
remove them.
Alert settings
To change the way the Navigation system warns you about speed
cameras, tap the
Alert settings
button.
You can then set how close you want to be to a speed camera
before you are warned and what type of sound will be played.
For example, to change the sound that is played when you
approach a fixed speed camera, do the following:
1. Tap
Services
in the Main Menu.
2. Tap
Speed Cameras
.
3. Tap
Alert settings
.
A list of speed camera types is displayed. A speaker is shown
next to the speed camera types that have been set for an alert.
4. Tap
Fixed cameras
.
5. Tap
NO
to avoid removing the fixed speed camera alerts.
6. Enter the time in seconds for when a warning is given before
you reach a camera. Then tap
Next
7. Tap the sound you want to be used for the warning.
Tips:
To switch off warning sounds for a camera type, tap
Silence
in step 7 above. You still see a warning in the
Driving View if you switch off the warning sound.
8. Tap
Done
to save your changes.
USA_NAVI_EN.book 37 ページ ２０１４年５月８日 木曜日 午後１２時５１分
