TomTom GO 625, User Manual

Page: 56 / 150

10
8. Your GO asks if you need to arrive at a particular time. For this exercise, tap
NO .
The route is calculated by your GO. IQ Routes
TM
is used to plan the best
possible route, using historical information about traffic speed on the roads.
9. When the route has been calculated, tap Done .
Your GO will immediately begin to guide you to your destination, using both
spoken instructions and on-screen directions.
Arrival times
When you plan a route, your TomTom GO asks you if you need to arrive at a
particular time.
Tap YES to enter a preferred arrival time.
Your GO calculates your arrival time and shows you whether you will arrive
on time.
You can also use this information to work out when you need to leave. If your
GO shows that you will arrive 30 minutes early, you can wait and leave in 30
minutes time, rather than arrive early.
Your arrival time is constantly recalculated during your trip. The status bar
shows whether you will arrive on time or if you are going to be late, as shown
below:
You will arrive 55 minutes before the arrival time you entered.
If the estimated arrival time is more than five minutes before
the time you entered, it is shown in green.
You will arrive 3 minutes before the arrival time you entered.
If the estimated arrival time is less than 5 minutes before the
time you entered, it is shown in yellow.
You will arrive 19 minutes late.
If the estimated arrival time is later than the time you entered,
it is shown in red.
Status bar
preferences
Tap Status bar preferences in the Preferences menu, to enable or disable
arrival time notifications.
Select the required options on the first menu screen and then tap Done .
To enable arrival time notifications, select Show leeway to arrival time .
To disable arrival time notifications, unselect Show leeway to arrival time .