.
- -
5
4 Operation
4.1 Hardware Description
The Bluetooth GPS has two LED light which each has two colors. One is GPS & Charge status LED,
that is named LED 2, and the other is Bluetooth & low power status LED, that is named LED 1. The
status table of LED shows as follows:
<State Table of LED>
LED1
BT & Low Power LED
Description
LED1 Color and Action
Bluetooth Active
Low Power
Blue Flash
Yes
No
Purple–Red Flash
Yes
Yes
LED2
GPS & Charge LED
Description
LED2 Color and Action
Battery Charged
Position Fixed
Dark No
No
Green Flash
No
Yes
Orange Yes
No
Orange-Red Flash
Yes
Yes
4.2 Turn on/off
Turn on
To turn on the receiver, press the power button on the topside
briefly (0.5 seconds). The right LED(LED 2) indicator will flash
briefly. The left LED(LED 1) indicator will start flashing. Note:
When the Receiver is in the cradle, it will switch on when power
to the cradle is switched on (to synchronize with vehicle ignition).
