14
Fig. 9
Fuse replacement (version)
The fuse is located near to the battery. If the fuse is blown, turn the
ignition switch (17, Fig. 3) to the position OFF. Replace the fuse with a
new one of the correct specification. Return the ignition switch to the
ON position and check operation. If the new fuse blows as well, have
the electrical circuit examined by an authorized service agent.
Caution:
Do not install a fuse with higher capacity than specified. An
incorrect fuse could seriously damage the electrical system or even
cause a fire.
CLEANING
Fuel System Cleaning (Fig. 9)
As regards the fuel system, periodic cleaning of the main jet, air filter
and fuel petcock filter is required. Do not use metal objects to clean the
main jet; clean it with an air jet.
Filter – sponge should be washed thoroughly in gasoline. After
washing, squeeze gasoline from the sponge (do not brush it) and dry
the sponge in a dry air jet.
