- 15 -
- 16 -
· Ensure that the charging port is clean and dry.
· Open the charging port on your V2 scooter.
· Make sure that there is no dust, debris or dirt inside the port
· Plug the charger into a grounded wall outlet.
· Connect the cable with the power supply (100V~240V; 50~60 Hz).
· Ensure the light on the charger is GREEN.
2-8.CHARGING YOUR V2
· SETTINGS
Press the gear icon to change settings for your V2.
· User Name - Customize the name for your V2 here. This name change will reflect in the dash-
board and connect pages.
· Password - Customize the password for the V2.
· Switch - Switch between MPH/KMH.
· Speed - Change the speed for the V2.
· Force - Change the Driving Force.
· Sensitivity - Change the Sensitivity for the V2.
Set Dormant Shutdown Time -This setting allows you to set a time for your V2 to shutdown auto-
matically.
· SKILL/SAFETY MODES
Cycle between 3 different skill modes. Each mode has a different top speed and sensitivity. The
mode will only change if you are not using your V2 scooter.
·Low Mode - This mode is recommended for first time TOMOLOO scooter users. In this mode, the
sensitivity and top speed are very low.
·Normal Mode - This mode is recommended for users that are comfortable using TOMOLOO scooter
but are not ready for full speed and extra sensitive controls. In this mode, the sensitivity and top
speed are moderate.
· HEADLIGHTS
Press "lights" to set a custom color and brightness for your V2's Path illumination Lights. Simply
choose your desired color from the color wheel. Slide the "Brightness" bar to adjust brightness. For
your convenience, 4 basic colors have also been set as presets below the brightness bar.
·High Mode - This mode is recommended for everyday TOMOLOO scooter users. In this mode, the
sensitivity and top speed are set to the maximum setting.
NOTE: Skill and safety mode must be selected. The TOMOLOO will default to " Normal"
mode if another mode is not selected.