14
Operating of Your
Wall Control
AIRFLOW
REVERSING
SWITCH
FAN MOTOR
ASSEMBLY
Figure 23
Fan installation must be completed,
including the installation of the fan blades
before testing the remote control.
!
WARNING
Your TBSW102 Fan/Light Wall Control
(Figure 22) has full control of your fan speed
and light intensity.
1.
To set the desired fan speed, push the HI,
MED, or LOW buttons to operate your fan
on high, medium or low speed (See Figure
22).
2.
To turn your fan off, press the FAN OFF
button.
3.
To set the level of light brightness, press
and hold the LIGHT button. The light
brightness will continue to increase then
decrease while the button is held down.
When the light is at the desired brightness,
release the button.
4.
To turn the light on or off, press and release
the LIGHT button. The light will turn on
at the light level previously set (See Step 3).
Red indicator light turns on when any
button is pressed. If the light does not
come on, replace the battery.
5.
If airflow is desired in the opposite
direction, turn the fan off and wait for the
blades to stop turning. Then slide the
reversing switch, located on top of the fan
motor assembly, to the opposite position
(Figure 23) and turn the fan on again. The
blades will turn in the opposite direction
and reverse the airflow.
LIGHT
BUTTON
FAN
SPEED
BUTTONS
FAN OFF
BUTTON
RED
INDICATOR
LIGHT
FAN OFF
LOW
MED
HI
LIGHT
Figure 22
BP7389 Prado TB310 2/1/09 2:29 PM Page 14
