STERILIZE AND DRY
1. Press the Automatic sterilize and dry button once. The appliance will beep once and the sterilization cycle
will start. The sterilizing time is approximately 10 minutes.
2. When the sterilizing cycle is complete, the drying cycle will follow automatically.
The drying time is approximately 30 minutes.
3. When the drying cycle is complete, the appliance will beep 5 times and power off automatically. Please allow to
cool for at least 5 minutes before opening the sterilizer.
STERILIZE ONLY
1. Press the sterilize button once. The appliance will beep once and the sterilization cycle will start. The sterilizing
time is approximately 10 mins.
2. When sterilization cycle is complete, the appliance will beep 5 times and switch off automatically. Please allow
to cool for at least 5 minutes before opening the sterilizer.
CAUTION!
If you need to drain water from the base, always pour sideways away from the air vent in the direction marked inside
the base.
DRY ONLY
1. Press the dry button once. The appliance will beep once and the drying cycle will start.
2. The drying cycle is approximately 30 minutes.
3. When the drying cycle is completed, the appliance will beep 5 times and switch off automatically. Please allow
to cool for at least 5 minutes before opening the sterilizer.
Please note: The sterilization and/or the drying cycle can be stopped any time by pressing the on/off button.
CLEANING
Unplug and allow to cool before cleaning. After each use pour away remaining water from the sterilizer base by tipping
the sterilizer and dryer sideways over a sink, ensuring no water gets into the air vent (i), and wipe clean with a damp
cloth only. The lid (a) and the two racks (b, c) can be cleaned in hot water. Do not clean with abrasive cleaners.
WARNING!
TO AVOID THE RISK OF ELECTRIC SHOCK, INJURY OR DAMAGE: ALWAYS UNPLUG YOUR PRODUCT BEFORE
CLEANING. DO NOT IMMERSE THE BASE, THE POWER CORD OR THE PLUG IN WATER OR OTHER LIQUIDS.
DO NOT CLEAN BASE UNDER WATER TAP.
DO NOT use metal objects or scourers to clean your Sterilizer and Dryer. DO NOT use bleach or sterilizing fluid to
clean it. DO NOT use abrasive or anti-bacterial materials. DO NOT scrub the heat plate.
CAUTION! UNDER NO CIRCUMSTANCES USE ABRASIVE, CORROSIVE OR SCRATCHING CLEANING AGENTS,
AS THESE COULD DAMAGE YOUR STERILIZER.
Please note: If there is insufficient water to complete the sterilization phase effectively, the appliance will ‘”beep” 5
times and the function light will flash for 2 hours. Do not use the bottles or accessories. Repeat usage instructions
to ensure effective sterilization. Drying time based on 260ml / 9oz bottles. If you are using larger bottles, then extra
drying time may be required.
CHOOSE YOUR FUNCTION
