BEFORE FIRST USE
You must insert the filter provided into the underside of the sterilizer base before you start using the sterilizer and dryer.
USAGE
It is important that all bottles, nipples and accessories are empty and that they are clean and fully rinsed in fresh
water before placing in the appliance for sterilization.
Use on level surface and be sure there is no debris under the unit and the rubber pads are touching the surface.
This sterilizer is designed for use with Tommee Tippee bottles and feeding accessories (except bottle brush).
The sterilizer will hold a maximum of 6 Tommee Tippee Closer to Nature bottles (maximum 4 Advanced Anti-colic bottles)
or a combination of fewer bottles plus pacifiers and breast pump parts.
Plug the sterilizer into the power outlet.
Press the on/off button.
The sterilizer will emit a “beep”
sound and the button will light up.
Choose your desired function
following the instructions on the
next page.
Place the lid (a) on top.
Please ensure that the lid fits
securely onto the upper rack
without any gaps.
Remove the lid (a) and the racks (b),
(c) from the sterilizer base (d). Pour
120ml of water onto the stainless
steel heater surface (do not go over
the max fill line (h)). If using dry only
function you do not need to add
any water.
Insert lower rack (c), place clean
bottles with their opening facing
downward onto the lower posts.
Place hoods onto the bottle bases.
Insert the upper rack (b) and
place in the bottle accessories
(eg. nipple and screw ring).
3
1
2
4
5
