1
2
3
4
5
6
7
SET UP
• Before you use your Perfect Prep for
the first time, you need to run a
cleaning cycle and fit your filter.
• Press the select button and then
follow the directions on your screen.
• Once you’ve fitted your filter, the unit
will warn you that the tank is empty
and that you need to add water.
• Use cold tap water.
• It can take up to 10 minutes for the
water to filter through into the base
of the unit.
• Once enough water has filtered
through, the tank empty warning
light will go off and your system is
ready to use.
TIP: The select button can be
pressed at any time during the
cleaning phase to pause the water
pumping through.
PRIMING YOUR FILTER
• Only ever handle the filter by
holding it by the blue cap.
• Remove the filter from packaging.
• Remove the sticker from the top of
the filter.
• Fill a bowl with cold tap water.
• Submerge the filter in water and
gently agitate until the bubbles stop.
• Your filter is now ready to fit into the
water hopper.
PRODUCT SETTINGS MENU
• Press and hold the forward button
for 3 seconds, then release. This gear
icon will appear.
• To scroll through the settings use the
back and forward buttons.
• Press the select button to enter a
particular setting.
• Settings:
When you
plug your
unit in for the
first time you
will see this:
Don’t forget to register your Perfect Prep machine.
For details of how to do this, go to
tommeetippee.co.uk/product-registration
Adjust volume
Clean unit
Descale unit
ml or floz
Fit new filter
Empty unit
ml
or
oz
GETTING TO KNOW YOUR PERFECT PREP MACHINE
INSTRUCTIONS FOR USE
Screen
Back button
Select button
Forward button
Water hopper
Bottle stand
Dispenser outlet
Included inside:
• 1x 150ml bottle with slow flow teat
• Milk storage lid
• 1 x anti-bacterial water filter
1
2
3
4
5
6
7
