PARENT UNIT
• Switch on by setting the power switch (15) to either
I
(on) or (vibrate) mode.
• At the same time, the power on indicator (12) will show a steady green.
Note: If this indicator starts flashing green, the Li batteries have run down and need to be recharged using
the supplied 5V AC adapter.
• The image captured by the camera should be shown on screen while the sound picked up by microphone
should be heard from speaker. If the screen shows “No signal or Out of Range”, it means the units are not
properly paired.
• Please ensure both the camera unit and parent unit are turned on. Follow steps in 'Pairing' section if
you need to pair.
• To achieve a better reception and longer communication range, rotate the antenna to a vertical position.
• For easy viewing, place the Parent unit on a flat surface by pulling out the stand on the back.
NIGHT VISION
When there is sufficient light in the room, the screen will show a colourful image. When the room gets dark, the IR
LED camera will automatically turn on to illuminate the surroundings and the screen will show a black and
white image.
MOVEMENT TRACKING
When baby becomes a toddler, you can activate the movement tracking function in the Parent unit and
the camera lens will automatically track the movement of your toddler.
Note: If there are several moving objects within the view as captured by camera lens, this tracking function
may not operate accurately.
How to change the volume
• Adjust the volume of the speaker using the +/- buttons on the top of the parent Parent unit. The volume will
show on the screen.
• If you prefer to have no sound, press the volume down button until you see the icon and the sound will be muted.
• Press volume up to resume sound.
How to move the camera using the Parent unit
To pan and tilt your camera use the buttons. Only press one button at a time.
How to talk to your baby using the Parent unit
You can talk to your baby at any time using the talk back function:
1.
Press and hold the talk back button, will show up on screen.
2.
Speak towards the microphone.
3.
Your voice will be heard from the speaker at the base of the camera.
4.
Adjust the volume of speaker using the Settings menu.
5.
Release the talk back button to listen to your baby.
How to use the Parent unit
16
14
19
17
15
24
11
12
5
13
10
18
16
Parent Unit with
fold out stand
CONTROLS
5.
Microphone
10.
LED sound level meter
11.
Camera pan and tilt
12.
Power ON/Charging indicator
13.
Talk back button
(select/ok button in menu mode)
14.
USB socket
15.
Power ON/OFF/Vibration switch
16.
Volume up/down button
17.
Speaker
18.
Menu button
19.
Pairing button
24.
Parent unit fold out stand
