3. CLEANING
Unplug and allow to cool before cleaning. After each use pour away remaining water from the bottle and pouch warmer
by tipping the bottle and pouch warmer sideways over a sink and wipe clean with a damp cloth only. Do not clean with
abrasive cleaners or allow to come into contact with solvents or harsh chemicals, damage could result.
DE-SCALING
The frequency of de-scaling should be as follows:
Hard water – 7 days
Medium – 14 days
Soft – 21 days
You can find out your water quality via your water provider.
After each use allow to cool before pouring away remaining water from the bottle and pouch warmer by tipping the
bottle and pouch warmer sideways over a sink and wipe with a damp cloth only. Unplug the bottle and pouch warmer
and allow to cool before cleaning. A build up of limescale can negatively affect the performance of the bottle and
pouch warmer. We recommend carrying out the descaling process as per above frequency guidelines to ensure the
bottle and pouch warmer continues to work efficiently. Living in a hard water area can produce limescale quicker than
other areas therefore descaling is required sooner. Use a descaler that is suitable for use with stainless steel and
use as per the manufacturer’s guidelines. Alternatively you can use white vinegar to descale your bottle and pouch
warmer, please use as per manufacturer’s guidelines. Once you have descaled then follow instructions under set up
to perform a final cleaning cycle. You may need to repeat the process if you find that limescale is still present. DO
NOT use metal objects or scourers to clean your bottle and pouch warmer. DO NOT use bleach to clean the bottle and
pouch warmer. DO NOT use abrasive or anti-bacterial materials.
INFORMATION ON THE DISPOSAL FOR WASTE ELECTRICAL & ELECTRONIC EQUIPMENT (WEEE)
This symbol on the products and accompanying documents means that used electrical and electronic products
should not be mixed with general household waste. For proper disposal for treatment, recovery and recycling, please
take these products to designated collection points where they will be accepted on a free of charge basis. In some
countries you may be able to return your products to your local retailer upon the purchase of a new product.
Disposing of this product correctly will help you save valuable resources and prevent any possible effects on human
health and the environment, which could otherwise arise from inappropriate waste handling. Please contact your local
authority for further details of your nearest collection point for WEEE.
Penalties may be applicable for the incorrect disposal of this product in accordance with national legislation.
The product is fitted with a BS 1363 mains plug containing a fuse. If it ever becomes necessary to replace the fuse,
only use fuses that are marked BS 1362, and rated at 13A. In the unlikely event that this plug is not suitable for the
sockets in your home, it should be removed and a suitable plug fitted as follows:
The wires of the mains lead are coloured in accordance with the following code:
GREEN AND YELLOW – EARTH
BLUE – NEUTRAL
BROWN – LIVE
As these colours may not correspond with the coloured markings sometimes used to identify the terminals in the plug,
connect as follows.
The wire coloured GREEN AND YELLOW must be connected to the terminal marked E or by the
earth symbol or coloured GREEN or GREEN AND YELLOW. The wire coloured BLUE must be
connected to the terminal marked N or coloured BLACK. The wire coloured BROWN must be
connected to the terminal marked L or coloured RED.
If you are in any doubt about how to wire a plug or replace a fuse safely, consult a qualified
electrician.
