1. SET UP
Please refer to instructions leaflet before use and remember to clean and descale your unit regularly. It is
recommended to run one cycle of the unit before use. Please refer to the instructions in the Usage section.
2. USAGE
For your childs safety always check milk temperature before feeding by testing on a sensitive part of the skin.
2
4
7
3
5
8
6
9
1
Lift the easy lift cradle and place
in the bottle or pouch. For hygiene
we recommend leaving the hood
on the teat.
Press power button to turn on the unit.
The LED will flash and beep once to
show the unit is in standby mode.
Select volume of feed - press until the
LED is adjacent to the amount of feed
to be warmed.
Place the easy lift cradle into the unit
and add 250ml/9floz of water using
your Tommee Tippee bottle.
Select bottle type - press until the
LED is adjacent to your requirement.
Press the power button, the unit will beep once to show the cycle has started.
When the cycle finishes the unit will beep 3 times, and LEDs will keep flashing
while the feed is still warm. Pressing any button will stop the LED flashing, or it will
automatically switch off after 45mins.
Select starting temperature - press
until the LED is adjacent to the
correct temperature of feed.
Remove feed after the
cycle is completed taking
care not to touch the water inside
the unit as it will have heated during
the cycle. Empty unit and wipe dry
with a clean cloth.
TO RESET/SWITCH OFF
To cancel a cycle - hold down the
power button for 3 seconds and the
unit will reset.
Place the unit on a clean, dry kitchen
work surface. Plug unit into the
mains power supply and switch on.
