Tomei ARMS MX8280 4B11, Installation Manual

Page: 20 / 40

CAUTION
■ This installation manual contains important information regarding this product.
For details regarding the assembly/disassembly of stock components, please refer to the
vehicle's official servicing manual.
■ This product is intended for motorsport use and should only be used on a racing circuit or
a circuit closed off from public roads.
■ Installing this product will increase the engine's power output. After installation, the engine
management system and other surrounding components will need to be adjusted accordingly.
■ Ensure you consistently monitor the turbo's performance using gauges and/or similar devices.
WARNING
■ Only install this product on the specified vehicles to avoid damaging the product and/or engine.
■ This product should be installed by a trained professional in a well-equipped workshop.
■ Ensure you use the appropriate tools and safety gear when installing this product.
Failing to do so may result in injury.
■ Install this product only when the engine is cool and/or cold to avoid potential fire hazards.
■ Ensure you use the correct specified torque for each fastening. Do not use excessive force
when attaching or removing components as this may damage the product and/or engine.
■ After starting the engine, thoroughly check to ensure that there are no oil/coolant leaks.
Leaking oil/coolant can lead to engine damage.
REQUIRED TOOLS FOR INSTALLATION
■General engine maintenance tools ■Torque wrench ■Official servicing manual
RELATED/RECOMMENDED PRODUCTS
CAUTION
The stock suction hose is not compatible with this product.
Please use a suction hose compatible with a 63mm (I.D) compressor inlet.
TURBO SUCTION HOSE EVO 10 63mm
P/N：TB301A-MT02B
Large diameter suction hose designed to fit
the 63mm diameter compressor inlet on this turbo.
(std. 60mm)
20